WarmpawPets - Header Component
Other Pets & Habitat Setups

Fluval C2 Power Filter

A rim-mounted filter for a tank whose hood, rim thickness, rear gap and operating water level permit a level installation. Its priming routine differs from an external canister.

Model14001 · US versionASINB003SJOLEQ
Hang-on-back filter
  • US model 14001 is listed at 120 V/60 Hz, 5 W and 450 L/h.
  • Manufacturer FAQ gives a maximum rim thickness of 1 inch.
  • The C Series instructions require a filled filter case before power-on.

See the current offer on Amazon

Confirm the exact ASIN, selected package, price and delivery terms before ordering.

View on Amazon ↗
As an Amazon Associate I earn from qualifying purchases.

The selected retailer listing also uses 14001A1 wording; confirm the delivered 14001 US label and the matching C Series manual.

A good fit when

The product matches the routine

  • The tank rim, hood opening and rear clearance accept the C2 body.
  • Normal water level remains within the manual’s installation range.
  • Media can be reached and maintained without disrupting the whole aquarium routine.
Pause the purchase when

A key condition remains unresolved

  • The rim is thicker than 1 inch or the case cannot hang vertically.
  • The tank’s water level falls below the manual’s permitted range.
  • You are assuming the same priming or electrical requirements as another Fluval family.
The everyday details

What matters in use

Rim-mounted structure

Water moves through a filter case behind the tank; clearance for the hood and rear wall matters.

Model-specific startup

Fill the C Series case before powering and use its stated priming flow setting.

Accessible media

Near-tank access can simplify checks, while correctly matched media and routine care remain necessary.

Exact model, clear specifications

Product specifications

Fluval C2 Power Filter specifications
Selected identityFluval C2 Power Filter, model 14001; ASIN B003SJOLEQ.
US electrical rating120 V / 60 Hz; 5 W per manufacturer US specifications.
Rated flow450 L/h per manufacturer US specifications.
Body dimensions15 × 11.9 × 17 cm.
Rim and levelMaximum rim thickness 1 in / 2.5 cm; water no more than 2.25 in / 6 cm below rim per cited instructions.
Make room for maintenance

Care and setup

Measure the actual rim and hood opening, then allow room to level the filter and remove media. Follow the C Series priming steps for this model rather than those of the Fluval 107.

Disconnect power for maintenance and follow the supplied media directions. Protect established biological media and avoid soap or detergents around filter components.

Before you buy

Common questions

Is the C2 installed below the tank like a 107?

No. The C2 hangs on a suitable rim; the 107 is an external canister with different placement rules.

Can I start it with an empty case?

The cited C Series instructions call for filling the filter case before power-on. Follow the delivered manual.

Does 450 L/h decide suitable fish stocking?

No. The tank’s animals, biological filter and tested water conditions need separate assessment.

Check the original information

Product references

The selected retailer listing also uses 14001A1 wording; confirm the delivered 14001 US label and the matching C Series manual. Verify current listing options and supplied instructions before purchasing.

Ready to check the exact order? View Fluval C2 Power Filter on Amazon ↗ · Affiliate disclosure

Fluval
C2 Power
View on Amazon ↗